Waga produktu: 30g
Minimalna ilość w zamówieniu: 1
Ilość produktów w opakowaniu jednostkowym: 1
HL-T1 - ultramały barierowy czujnik laserowy o bardzo mysokiej rozdzielczości
| Item | Specifications |
|---|---|
| Product Number | HL-T1001F |
| Part Number | HL-T1001F |
| Type | Beam diameter dia.1 mm dia.0.039 in type |
| Regulatory compliance | EMC Directive, RoHS Directive |
| Applicable controller | HL-AC1, HL-AC1P |
| Sensing range | ■■【In the case of(0 to 500 mm 0 to 19.685 in)】■■ Sensing width: ø1 mm ø0.039 in Min. sensing object: ø8 micro m ø0.315 mil opaque object Repeatability (During the state in which light is half blocked): 4 micro m 0.157 mil (Note：In case of an average sampling rate of 64 times.) Linear output resolution: 4 micro m 0.157 mil (Note) In case of an average sampling rate of 64 times. (Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width. (Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mm ø0.039 in.) ■■【In the case of (500 to 2,000 mm 19.685 to 78.74 in)】■■ Sensing width: ø1 to ø2.5 mm ø0.039 to ø0.098 in Min. sensing object: ø50 micro m ø1.969 mil opaque object Repeatability (During the state in which light is half blocked): - Linear output resolution: - - |
| Emission indicator | Green LED (lights up during laser emission) |
| Interference prevention function | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| Pollution degree | 3 (industrial environment) |
| Environmental resistance : Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -25 to +65 ℃ -13 to +149 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Environmental resistance : Ambient illuminance | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
| Emitting element : IEC / JIS standards conforming type | Red semiconductor laser Class 1 (IEC / JIS) (modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm 0.026 mil) |
| Emitting element : FDA regulations conforming type | Red semiconductor laser Class II (FDA) (modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm 0.026 mil) (IEC / JIS: Class 1) |
| Material | Enclosure: Polyetherimide Case cover: Polycarbonate Front cover: Glass |
| Cable | 0.09mm2 3-core shielded cable with connector, 0.5 m 1.640 ft long |
| Cable extension | Extension up to total 10 m 32.808 ft is possible, with the optional cable. |
| Weight | Emitter: 15 g approx. Receiver: 15 g approx. |
| Accessory | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiver CN-HLT1-1(Sensor head to controller connection cable): 1 cable Laser beam alignment sticker: 2 pcs. Label set (FDA regulations conformed type only): 1 set |
