Oferta


Automatyka przemysłowa

Filtruj


Producent

Cena promocyjna

HLT1001A


Typ: Czujniki pomiarowe

Symbol: HL-T1001A

Producent: Panasonic

Waga produktu: 30g

Minimalna ilość w zamówieniu: 1

Ilość produktów w opakowaniu jednostkowym: 1

Opis produktu


HL-T1 - ultramały barierowy czujnik laserowy o bardzo mysokiej rozdzielczości

 

Item Specifications
Product Number HL-T1001A
Part Number HL-T1001A
Type Beam diameter dia.1 mm dia.0.039 in type
Regulatory compliance EMC Directive, RoHS Directive
Applicable controller HL-AC1, HL-AC1P
Sensing range ■■【In the case of(0 to 500 mm 0 to 19.685 in)】■■
Sensing width:
ø1 mm ø0.039 in

Min. sensing object:
ø8 micro m ø0.315 mil opaque object

Repeatability (During the state in which light is half blocked):
4 micro m 0.157 mil
(Note:In case of an average sampling rate of 64 times.)

Linear output resolution:
4 micro m 0.157 mil
(Note) In case of an average sampling rate of 64 times.
(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.
(Note:This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mm ø0.039 in.)


■■【In the case of (500 to 2,000 mm 19.685 to 78.74 in)】■■
Sensing width:
ø1 to ø2.5 mm ø0.039 to ø0.098 in

Min. sensing object:
ø50 micro m ø1.969 mil opaque object
Repeatability (During the state in which light is half blocked): -

Linear output resolution: -
-
Emission indicator Green LED (lights up during laser emission)
Interference prevention function Two units of sensors can be mounted close together. (When the controller interference prevention function is used)
Pollution degree 3 (industrial environment)
Environmental resistance : Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -25 to +65 ℃ -13 to +149 ℉
Environmental resistance : Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminance Incandescent light: 10,000 liter x or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element : IEC / JIS standards conforming type Red semiconductor laser Class 1 (IEC / JIS)
(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm 0.026 mil)
Emitting element : FDA regulations conforming type Red semiconductor laser Class II (FDA)
(modulated, max. output: 0.2 mW, peak emission wavelength: 650 nm 0.026 mil)
(IEC / JIS: Class 1)
Material Enclosure: Polyetherimide
Case cover: Polycarbonate
Front cover: Glass
Cable 0.09mm2 3-core shielded cable with connector, 0.5 m 1.640 ft long
Cable extension Extension up to total 10 m 32.808 ft is possible, with the optional cable.
Weight Emitter: 15 g approx.
Receiver: 15 g approx.
Accessory MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiver
CN-HLT1-1(Sensor head to controller connection cable): 1 cable
Laser beam alignment sticker: 2 pcs.
Label set (FDA regulations conformed type only): 1 set

 

Pliki do pobrania


Mimo dołożenia wszelkich starań nie gwarantujemy, że publikowane dane techniczne oraz zdjęcia nie zawierają braków lub błędów. Ponieważ ewentualne błędy nie mogą być podstawą do roszczeń, w przypadku wątpliwości prosimy przed zakupem o kontakt z handlowcem.