Oferta


Automatyka przemysłowa

Filtruj


Producent

Cena promocyjna

FZ11P


Typ: Wzmacniacze światłowodowe

Symbol: FZ-11P

Producent: Panasonic

Waga produktu: 85g

Minimalna ilość w zamówieniu: 1

Ilość produktów w opakowaniu jednostkowym: 1

Opis produktu


Color Detection Fiber Sensor FZ-10

Item Specifications
Product Number FZ-11P
Part Number FZ-11P
CE marking directive compliance EMC Directive, RoHS Directive
Applicable fibers FD-L51, FD-L52, FD-L53, FD-L54
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption 45 mA or less
Sensing object Opaque or translucent object larger than the spot diameter of the applicable fiber
(Note) Make sure to confirm detection with an actual sensor before use.
Output PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization category DC-12 or DC-13
Output:Output operation Switchable either Coincident-ON or Incoincident-ON
Output:Short-circuit protection Incorporated
Response time 1 ms or less (3 ms or less when auto-teaching has been engaged)
Indicators Power indicator: Green LED (lights up when the power is ON, blinks during auto-teaching)
Operation indicator: Red LED (lights up when the output is ON)
* Both blink alternately when a manual teaching error occurs
Both blink simultaneously when the output is short-circuited
Timer function Approx. 40 ms fixed OFF-delay timer (switchable either effective or ineffective)
Teaching Button operation, Switchable either manual-teaching or auto-teaching
Tolerance Adjustable in 16 grades with the tolerance adjuster
Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃ -4 to +158 ℉
(Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃ +59 to +95 ℉ when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution.
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element Red LED / Green LED / Blue LED (Peak emission wavelength: 644 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil, modulated)
Material Enclosure: ABS
Case cover: Polycarbonate
Fiber lock lever: PPS
Cable 0.2 mm2 3-core cabtyre cable, 2 m 328.084 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 85 g approx.
Accessory MS-DIN-3 (Amplifier mounting bracket): 1 pc.
Adjusting screwdriver: 1 pc.

Mimo dołożenia wszelkich starań nie gwarantujemy, że publikowane dane techniczne oraz zdjęcia nie zawierają braków lub błędów. Ponieważ ewentualne błędy nie mogą być podstawą do roszczeń, w przypadku wątpliwości prosimy przed zakupem o kontakt z handlowcem.