Oferta


Automatyka przemysłowa

Filtruj


Producent

Cena promocyjna

FX311B


Typ: Wzmacniacze światłowodowe

Symbol: FX-311B

Producent: Panasonic

Waga produktu: 15g

Minimalna ilość w zamówieniu: 1

Ilość produktów w opakowaniu jednostkowym: 1

Opis produktu


Item Specifications
Product Number FX-311B
Part Number FX-311B
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
Output NPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output:Output operation Selectable either Light-ON or Dark-ON, with selection switch
Output:Short-circuit protection Incorporated
Response time 150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster 12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Timer function Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Automatic interference prevention function Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
Ambient temperature -10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Emitting element (modulated) Blue LED
Emitting element (modulated):Peak emission wavelength 470 nm 0.019 mil
Material Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Connection method Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 15 g approx., Gross weight: 20 g approx.

Lista pozostałych modeli:

FX-311B, FX-311G, FX-311P, FX-311BP, FX-311GP

 

(przy większych projektach uprzejmie prosimy o kontakt w celu uzgodnienia cen specjalnych)

Mimo dołożenia wszelkich starań nie gwarantujemy, że publikowane dane techniczne oraz zdjęcia nie zawierają braków lub błędów. Ponieważ ewentualne błędy nie mogą być podstawą do roszczeń, w przypadku wątpliwości prosimy przed zakupem o kontakt z handlowcem.