Waga produktu: 160g
Minimalna ilość w zamówieniu: 1
Ilość produktów w opakowaniu jednostkowym: 1
| Part Number | AGM1Y64P |
| Product | Digital output unit |
| Product name | Motion Controller GM1 |
| Item | Specifications |
|---|---|
| Rated voltage | 24 V DC |
| Operating voltage range | 20.4 to 28.8 V DC |
| Allowable momentary power failure time | 10 ms |
| Operating ambient temperature | 0 to +55℃ |
| Storage ambient temperature | -40～+70 ℃ |
| Operating ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
| Storage ambient humidity | 10 to 95 % RH (at +25 ℃, no condensation or icing) |
| Dielectric strength (Leakage current: 5 mA) | 500 V AC for one minute *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
| Insulation resistance (Test voltage: 500 V DC) | 100 MΩ or more *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance. |
| Vibration resistance | Compliant with JIS B 3502, IEC 61131-2 5 to 8.4 Hz, half amplitude 3.5 mm, 8.4 to 150 Hz acceleration 9.8 m/s2 10 sweeps each in X, Y and Z directions (1 octave/min) |
| Shock resistance | Compliant with JIS B 3502, IEC 61131-2 147 m/s2, 3 times each in the X, Y, Z directions |
| Noise resistance | 1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal) |
| Atmosphere | Free of corrosive gases No excessive dust |
| European EU Standards | EMC: EN 61131-2 RoHS: EN IEC 63000 |
| Overvoltage category | Category II |
| Pollution degree | 2 |
| Weight (main unit) | Approx. 160 g (including the terminal block) |
| Consumption current | 160 mA or less |
| Item | Specifications |
|---|---|
| Insulation method | Optical coupler |
| Output type | PNP Open collector (Source Type) |
| Rated load voltage | 5 to 24 V DC |
| Allowable load voltage range | 4.75 to 26.4 V DC |
| Max. load current | 0.3 A (20.4 to 26.4 V DC), 30 mA (4.75 V DC) |
| Common restrictions | 3.2 A / common |
| Max. inrush current | 0.6 A |
| OFF state leakage current | 1 μA or less |
| ON state max. voltage drop | 0.5 V or less |
| Response time | OFF→ON: 0.1 ms or less (Load current: 2 mA or more) ON→OFF: 0.5 ms or less (Load current: 2 mA or more) |
| External power supply | Voltage: 4.75 to 26.4 V DC Current: 90 mA / common (at 24 V) |
| Surge absorber | Zener diode |
| Short-circuit protection | None |
| Input points per common | 32 points / 1 common |
| Operating mode indicator | 32-point LED display (Lit when ON, selection using the display selector switch) |
| External connection method | Connector connection (Compliant with the MIL standard, 40P, two pieces used) |
